[gpfsug-discuss] Connecting IBM ESS 3200 to 10 Gb Ethernet

[Paul Ward]

We were supplied with additional 10Gbps cards in our ESS.
We didn’t realise there were two identical 10gbps cards in the chassis which lead to some confusion…
I finally twigged and realised the cables were plugged into one, and the configuration was applied to the other 😊
Sorry network team it wasn’t a problem with the network!

Kindest regards,
Paul

Paul Ward
TS Infrastructure Architect
Natural History Museum
T: 02079426450
E: p.ward at nhm.ac.uk<mailto:p.ward at nhm.ac.uk>
[A picture containing drawing  Description automatically generated]

From: gpfsug-discuss <gpfsug-discuss-bounces at gpfsug.org> On Behalf Of Andrew Beattie
Sent: Monday, June 5, 2023 4:52 PM
To: gpfsug main discussion list <gpfsug-discuss at gpfsug.org>
Subject: Re: [gpfsug-discuss] Connecting IBM ESS 3200 to 10 Gb Ethernet

Prasad,

You would be better off looking at the following:

https://www.nvidia.com/en-au/networking/ethernet/cable-accessories/

This will allow you to adapt from the QSFP+ 100GB transceiver down to a SFP+ 10GB transceiver and then use standard OM4 cable and Cisco 10GB transceivers at the other end.

However I will also comment that using 10GB network for an all flash ESS is a bit like buying an F1 racing car and never taking it out of first gear.

You would honestly be better investing in a single 100GB switch to at least build the ESS cluster at 100Gbit and getting the full potential bandwidth from your investment in NVMe

Otherwise buy a FS5200 + 2 x86 servers and some scale licensing, because you are down rating the ESS3200 to less than 25% of its potential performance


Regards,

Andrew Beattie
Technical Sales Specialist - Storage for Big Data & AI
IBM Australia and New Zealand
P. +61 421 337 927
E. abeattie at au1.ibm.com<mailto:abeattie at au1.ibm.com>
Twitter: AndrewJBeattie
LinkedIn:
________________________________
From: gpfsug-discuss <gpfsug-discuss-bounces at gpfsug.org<mailto:gpfsug-discuss-bounces at gpfsug.org>> on behalf of Prasad Surampudi <prasad.surampudi at theatsgroup.com<mailto:prasad.surampudi at theatsgroup.com>>
Sent: Monday, June 5, 2023 11:24:01 PM
To: gpfsug-discuss at gpfsug.org<mailto:gpfsug-discuss at gpfsug.org> <gpfsug-discuss at gpfsug.org<mailto:gpfsug-discuss at gpfsug.org>>
Subject: [EXTERNAL] [gpfsug-discuss] Connecting IBM ESS 3200 to 10 Gb Ethernet

Does anyone know if we can connect IBM ESS 3200 to a customer 10 Gb ethernet network? If so what cables we need to connect it to a Cisco C93180YC-EX switch? Does it support 100 Gb to 4x10 GB fanout connections? Prasad Surampudi | Sr. Systems
ZjQcmQRYFpfptBannerStart
This Message Is From an External Sender
This message came from outside your organization.

ZjQcmQRYFpfptBannerEnd



Does anyone know if we can connect IBM ESS 3200 to a customer 10 Gb ethernet network? If so what cables  we need to connect it to a Cisco C93180YC-EX switch? Does it support 100 Gb to 4x10 GB fanout connections?

Prasad Surampudi | Sr. Systems Enginee
prasad.surampudi at theatsgr<mailto:prasad.surampudi at theatsgroup.com>oup.com<mailto:prasad.surampudi at theatsgroup.com> | 302.419.5833

Innovative IT consulting & modern infrastructure solutions
www.theatsgroup.com<http://theatsgroup.com/>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://gpfsug.org/pipermail/gpfsug-discuss_gpfsug.org/attachments/20230605/a25f5ab4/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 5356 bytes
Desc: image001.jpg
URL: <http://gpfsug.org/pipermail/gpfsug-discuss_gpfsug.org/attachments/20230605/a25f5ab4/attachment.jpg>